NRF24L01+PA+LNA
ماژول بالا رو به دانگل یو اس بی وصل کنید و با این دستورات کنترلش کنید

AT Commands
Baudrate : AT+BAUD=n where n = 1-6 (1:4800,2:9600,3:14400,4:19200,5:38400,6:115200) (default 9600Kbps)
NRF Rate : AT+RATE=n where n = 1-3 (1:250K, 2:1M, 3:2M ) (default 2Mbps)
Local Address : AT+RXA=0Xnn,0Xnn,0Xnn,0Xnn,0Xnn where nn are the local receiving address (default 0xff,0xff,0xff,0xff,0xff)
Target Address : AT+TXA=0Xnn,0Xnn,0Xnn,0Xnn,0Xnn where nn are the target address
Operating Freq. : AT+FREQ=2.nnnG where nnn = 400 / 525 (default 2.400G)
Checksum mode : AT+CRC=n where n = 8 /16 (default : 16 bit)
System info : AT?
--------------------
AT+BAUD=2
AT+RATE=2
AT+RXA=0xF0,0xF0,0xF0,0xF0,0xD2
AT+TXA=0xF0,0xF0,0xF0,0xF0,0xE1
AT+FREQ=2.476G
AT+CRC=16
AT?
--------------------