int right_pin = 10;
int left_pin = 11;
int up_pin = 14;
int center_pin = 4;
int down_pin = 13;
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
pinMode(right_pin, INPUT);
pinMode(left_pin, INPUT);
pinMode(up_pin, INPUT);
pinMode(center_pin, INPUT);
pinMode(down_pin, INPUT);
}

void loop() {
// put your main code here, to run repeatedly:
int right_value = digitalRead(right_pin);
if (right_value == 1)
{
Serial.println("right");
}
}
int left_value = digitalRead(left_pin);
if (left_value == 1)
{
Serial.println("down");
}
int up_value = digitalRead(up_pin);
if (up_valu == 1)
{
Serial.println("UP");
}
int center_value = digitalRead(center_pin);
if (center_value == 1)
{
Serial.println("center");
}
int down_value = digitalRead(down_pin);

if (down_value == 1)
{

Serial.println("down");

}
}