شیلد جوی استیک آردوینو (دو محوره)

[magmagmary]

after opening the serial monitor, you should see different values printed on a line and refreshed very quickly. these are the state of the various buttons present on the joystick shield, as well as the
.current position (x and y value) of the joystick

// Store the Arduino pin associated with each input


// Select button is triggered when joystick is pressed
const byte PIN_BUTTON_SELECT = 8; 


const byte PIN_BUTTON_F = 7;
const byte PIN_BUTTON_E = 6;


const byte PIN_BUTTON_RIGHT = 3;
const byte PIN_BUTTON_UP = 2;
const byte PIN_BUTTON_DOWN = 4;
const byte PIN_BUTTON_LEFT = 5;


const byte PIN_ANALOG_X = 0;
const byte PIN_ANALOG_Y = 1;


void setup() {
  Serial.begin(9600);


  pinMode(PIN_BUTTON_RIGHT, INPUT);
  digitalWrite(PIN_BUTTON_RIGHT, HIGH);


  pinMode(PIN_BUTTON_LEFT, INPUT);
  digitalWrite(PIN_BUTTON_LEFT, HIGH);


  pinMode(PIN_BUTTON_UP, INPUT);
  digitalWrite(PIN_BUTTON_UP, HIGH);


  pinMode(PIN_BUTTON_DOWN, INPUT);
  digitalWrite(PIN_BUTTON_DOWN, HIGH);


  pinMode(PIN_BUTTON_SELECT, INPUT);
  digitalWrite(PIN_BUTTON_SELECT, HIGH);
  
  pinMode(PIN_BUTTON_E, INPUT);
  digitalWrite(PIN_BUTTON_E, HIGH);
  
  pinMode(PIN_BUTTON_F, INPUT);
  digitalWrite(PIN_BUTTON_F, HIGH);
}


void loop() {
  
  Serial.print("U:");
  Serial.print(digitalRead(PIN_BUTTON_UP));
  Serial.print(" ");


  Serial.print("R:");
  Serial.print(digitalRead(PIN_BUTTON_RIGHT));
  Serial.print(" ");
  
  Serial.print("D:");
  Serial.print(digitalRead(PIN_BUTTON_DOWN));
  Serial.print(" ");
  
  Serial.print("L:");
  Serial.print(digitalRead(PIN_BUTTON_LEFT));
  Serial.print(" ");




  Serial.print("x:");
  Serial.print(analogRead(PIN_ANALOG_X));
  Serial.print(" ");


  Serial.print("y:");
  Serial.print(analogRead(PIN_ANALOG_Y));
  Serial.print(" ");




  Serial.print("S:");
  Serial.print(digitalRead(PIN_BUTTON_SELECT));
  Serial.print(" ");
  
  
  Serial.print("F:");
  Serial.print(digitalRead(PIN_BUTTON_F));
  Serial.print(" ");
  
  Serial.print("E:");
  Serial.print(digitalRead(PIN_BUTTON_E));
  Serial.print(" ");




  Serial.println();
}