مشکل در راه اندازی sim800l

[magmagmary]

میشه اینجا کپی کنید کد رو ؟ سخت افزارم درسته . حتی من قبلا یه کد نوشتم سنسور pir با gsm واسه زنگ زدن. جواب میداد . یعنی حرکت که دیده میشد تماس میگرفت . الان تست میکنم تماسم نمیگیره.با اردوینو... ولی خود ماژول رو با مبدل وصل میکنم با ATD تماس میگیره ! کلا سیم800 قاطیه خیلی. اینو اغلب بچه ها هم میگن درسته ؟

بسیار هم ماژول خوبیه

#include <SoftwareSerial.h>
SoftwareSerial SIM900(2, 3);
#define GSMReset 5








void setup() {
  Serial.begin(9600); // for serial monitor
  SIM900.begin(9600); // for GSM shield
  gsmPower();
  gsmConfig();
}




void loop() {
  commandDetect();
  smsProcess();
}
//*********************************************************************************
void gsmConfig() {
  pinMode(GSMReset, OUTPUT);
  sendCommand("AT+CMGF=1\r", 100); // set SMS mode to text
  sendCommand("AT+CNMI=2,2,0,0,0\r", 100);
  sendCommand("AT+CFUN=1", 2000);
  sendCommand("AT+CREG?", 1000);
  Serial.println("The end of Config process");
  Serial.println("Ensert\n 'd' for dial \n 'e' for english sms \n 'f' for farsi sms");
}
//**********************************************************************************
void showSms() {
  char incoming_char = 0;
  if (SIM900.available() > 0)
  {
    incoming_char = SIM900.read(); //Get the character from the cellular serial port.
    Serial.print(incoming_char); //Print the incoming character to the terminal.
  }
}
//***********************************************************************************
void smsProcess() {
  char incoming_char = 0;
  if (SIM900.available() > 0)
  {
    incoming_char = SIM900.read();
    if (incoming_char == 'H')
    {
      delay(10);
      Serial.print("horaaaaaaaaaaaaaaaaaaay");
    }
  }
}
//***********************************************************************************
void gsmPower() {
  Serial.println("Turning GSM ON");
  digitalWrite(GSMReset, HIGH);
  delay(10);
  digitalWrite(GSMReset, LOW);
  delay(100);
  digitalWrite(GSMReset, HIGH);
  delay(7000);
  Serial.println("config process...");
}




//**********************************************************************************




void sendCommand(String cmd, int t)
{
  SIM900.println(cmd);
  delay(t);
  readSerial();
}




//**************************************************************************************
void readSerial() {
  while (SIM900.available())
    Serial.write(SIM900.read());
}




//***********************************************************************************




void dialNumber(String number) {
  Serial.println("Dialing...");
  sendCommand("ATD" + number + ";", 100);
  Serial.println("End of Dial process");
  delay(2000);
  Serial.println("Ensert\n 'd' for dial \n 'e' for english sms \n 'f' for farsi sms");
}
//************************************************************************************
void ensms()
{
  Serial.println("Sending SMS");
  sendCommand("AT+CSCS=\"IRA\"", 200);
  sendCommand("AT+CMGF=1", 200);
  sendCommand("AT+CSMP=17,167,0,0", 200);
  sendCommand("AT+CMGS=\"09331424592\"", 500);
  sendCommand("Salam\r\n AftabRayaneh !\x1A", 0);
  Serial.println("End of English SMS process");
  delay(2000);
  Serial.println("Ensert\n 'd' for dial \n 'e' for english sms \n 'f' for farsi sms");
}
//****************************************************************************************
void farsisms()
{
  Serial.println("Sending SMS");
  sendCommand("AT+CSCS=\"HEX\"", 100);
  sendCommand("AT+CMGF=1", 100);
  sendCommand("AT+CSMP=17,167,0,8", 100);
  sendCommand("AT+CMGS=\"+09331424592\"", 500);
  sendCommand("0633064406270645060C002006220641062A0627062800200631062706CC062706460647\x1A", 0);
  Serial.println("End of Persian SMS process");
  delay(2000);
  Serial.println("Ensert\n 'd' for dial \n 'e' for english sms \n 'f' for farsi sms");
}
//*******************************************************************************************
void commandDetect() {
  if (Serial.available() > 0)
  {
    char data = Serial.read();
    switch (data)
    {
      case 'd' : dialNumber("09331424592");
        break;




      case 'e' : ensms();
        break;




      case 'f' : farsisms();
        break;
    }
  }
}